Enclosures in low volume: vacuum casting, printing or a modified stock box
A recurring question from hardware founders: the electronics work, the enclosure has to look like a product, and the quantity is 10, 50 or a few hundred. Injection moulding gives the best part but needs a steel or aluminium tool that only pays off at higher volume. Below that, four routes cover almost every case. Pick by quantity, how the part must look and how often the design will still change.
1. Vacuum (urethane) casting: looks moulded, no hard tool
A shop prints or machines one master part, pours a silicone mould around it and casts polyurethane parts in that mould. Each silicone mould gives roughly 15 to 25 parts before it wears, so a run of 100 means a handful of moulds. Parts come out in colour, with a texture close to an injection-moulded finish, and with materials that imitate ABS, PC or rubber. Best for 10 to about 200 units where appearance matters. Ask for: the master method, the resin family, colour matching (Pantone or RAL) and how many moulds the quote assumes.
2. Industrial 3D printing plus finishing: fastest, no tooling at all
Multi Jet Fusion (MJF) or SLS in PA12 nylon gives strong, accurate parts with a slightly grainy surface. Dyeing (usually black), bead blasting, vapour smoothing or a soft-touch paint make them look finished. No tooling means every design change is free, which matters while the product is still moving. Best for 1 to a few hundred units, and for anything that will change again. Ask for: the printing process (MJF, SLS or SLA), the post-processing step by step, and whether the quote includes cosmetic inspection.
3. A modified stock enclosure: cheapest if a standard size is close
Manufacturers such as Hammond, Takachi, Bopla or OKW sell plastic and aluminium enclosures in hundreds of sizes. A local CNC shop cuts the openings, and a printed or laser-cut front panel (or a UV-printed label) gives it your face. Tooling cost is zero and lead time is short, but you design around the box, not the other way round. Best when the electronics fit a catalogue size and the look can be achieved with the front panel.
4. Sheet metal: robust, industrial, scales well
Laser-cut and bent aluminium or steel, powder coated. It suits devices that may look technical: test equipment, industrial controllers, audio gear. Online sheet-metal services take a STEP file and quote the same day. Best for 10 to thousands of units when a folded, boxy shape works. Ask for: bend radius and minimum flange length, hardware insertion (PEM nuts and standoffs) and powder-coat colour.
When injection moulding starts to make sense
When the design is frozen, the quantity is in the high hundreds or thousands per year and the enclosure must be cheap per piece. Many teams bridge: vacuum casting or printing for the first batches, then a mould once the design has stopped changing. Design for moulding from day one (uniform walls, draft on vertical faces, bosses tied into ribs) so the switch does not mean a redesign.
What every shop will ask you for
A STEP file of the enclosure parts. Quantity breaks, for example 10, 50 and 200. Material and colour. Which faces are cosmetic and which are hidden. Inserts, screws and how the halves close (snap fits, screws, ultrasonic welding). Tolerances only where they matter (the PCB mounting points and the openings). Ship-to country. Sending this in the first message is the difference between a quote in two days and a week of questions.
Splitting the whole product, not just the enclosure
An enclosure is rarely the only part: there is usually a PCB, a battery, buttons, a light pipe, a label and packaging. Our prototype planner takes a product description and lists the parts, which to buy and which to have made, the process for each made part and manufacturers that do it. Cost figures there are rough estimates, not quotes.